Large windows, more natural light.
Large windows bring daylight deep into a house, add passive solar heat in winter, and open the room to the view. They only do this well if frame and glass insulate so effectively that the large glass area does not become a heat leak.
Why daylight indoors matters
People spend most of their time inside. One study puts the average for Germans at 15.7 hours a day at home. Whatever daylight reaches them during those hours comes through the windows.
Daylight affects well-being; an overview of the research is available under benefits of natural light. For the architect the practical point is simple: a larger glass area and a narrower frame let more light into the room, and the light reaches further into the floor plan. Rooms need artificial light for fewer hours.
Passive solar heat
Glass also lets solar energy in. In winter this is a free source of heat, and it is one of the principles the passive house relies on. South-facing glass captures the most winter sun.
Two values describe what a window does here:
| Value | Meaning |
|---|---|
| Uw | heat lost through the whole window: the lower, the better the insulation |
| g-value | share of solar energy that passes through the glass: the higher, the more solar gain |
A large window only helps the energy balance if both are right. The ENERsign primus window reaches Uw = 0.60 W/(m²K) as a tilt-and-turn unit and Uw = 0.59 W/(m²K) with fixed glazing, per EN 10077. In summer, exterior sun shading limits the heat that enters.
The view
A large fixed window frames the landscape. How much of it you see depends on the frame as much as on the glass. Narrow sight lines keep the frame out of the picture, and where the sash is concealed, fixed and operable units show the same continuous glass line.
What sizes are possible
Large formats are the focus of the ENERsign primus system. The lift-and-slide door is built up to 2,800 mm high and up to 10,000 mm wide overall, with sliding panels of up to 500 kg. Fixed glazing and two-sash balcony doors are available in large formats as well; the possible dimensions depend on glass, structure, and location and are worked out per project.
What to consider in the design
- Orientation: south-facing glass gains the most heat in winter and needs shading in summer.
- Frame share: the narrower the frame, the more light and solar gain per opening.
- Glazing: triple glazing insulates well; the coating determines how much daylight still passes.
- Structure: large units are heavy. Clarify loads, transport, and installation early.
Next step
Send us your elevations and the sizes you have in mind. We will tell you what can be built and with which values: Project inquiry. Built examples are shown under projects.
Last updated: 2026-11-17